Hello everyone!   In the recent time i'm encountering >20% CPU load on one of our 3750G stacked switch, which is not normal. Here's output of sh proc cpu sort:   CPU utilization for five seconds: 21%/4%; one minute: 22%; five minutes: 22% PID Runt...

Hello!I have cat 6500 with SUP32-GE-3B/MSFC2A/PFC3B, s3223-adventerprisek9-mz.122-33.SXJ6.bin,and WS-X6148-GE-TX module.And I have a couple of 3750G.On all of 3750G there is a broadcast filtering of VLAN 4000, and it's working:mac access-list extende...

We have two 2921 routers (R1 and R2) and stack of 3750X-12S and 3750X-24P-S (S1), R1 Gi 0/0 goes to Gi 1/0/1, R2 Gi 0/0 goes to Gi 2/0/1 of stacked switch S1. Configuration of interfaces: ! on R1interface GigabitEthernet0/0 ip address 192.168.40.253...

Hello everyone. I'm encountering strange problem. When i'm stacking two 3750X (12S and 24P-S), 12S boots fine, "show switch" on 12S shows "Feature mismatch" as a state of 24P-S,  and 24P-S keep rebooting and giving me this:@@@@@@@@@@@@@@@@@@@@@@@@@@@...

Hello everybody. I have a network with two 2921 routers in it (K22.R1 and K22.R2), each router runs OSPF process with all networks that this router belongs to ncluding voice network), each have it's own CME (9.1), first CME works in VLAN 2 (10.10.22....