About Zohaib Khan

Zohaib Khan · 10-30-2017

Hi All, We are facing issue with our 6807-XL Details: Supervisor: C6807-XL-S6T-BUNModule: C6800-32P10G and C6800-16P10G Software Version: 15.4(1)SY We are facing issue with SFP: SFP: GLC-SX-MMD and GLC-T (It shows unsupported SFP module an...

Zohaib Khan · 10-13-2017

Hi We have following controller and Access Point in our wireless environment, Model No. AIR-CT5520-K9 Software Version 8.2.151.0 Access Point: AIR-AP3802E-E-K9 We have 2 Gbps internet up-links for these wireless clients, we want to t...

Zohaib Khan · 06-02-2016

Hi All, We have Air-AP1852i-x-k9 APs and want Configure Cisco Mobility express before moving to implementation want to know the image version of that access point. I have connected the console direct to access point. Its a new access point. Its aski...

Zohaib Khan · 03-21-2015

Hi All, I am looking to upgrade my WLC 2504 from Software Version 7.5.102.0toSoftware Version 8.0.110.0is there any issue i can face during this process?? How i can check FUS first, do i have to update FUS then image or i can go directly to Software ...

Zohaib Khan · 02-04-2015

Hi all, I have a very basic question, how Lightweight access point work after joining WLC. when client will connect to AP after successful authentication how client device will work, every time when traffic for that client have to pass from WLC or n...

Zohaib Khan · 12-30-2015

Hi, in Access SW Put in global config. : no ip dhcp snooping information option ---- by default switch adds option 82 in DHCP packet. there is a complete discussion on following link: https://learningnetwork.cisco.com/thread/63215

Zohaib Khan · 04-05-2015

Hi All, These settingwork for me: from GUI > Security > AP Policies > SSC and MIC certificates are checkedfrom GUI > Controller tab > Advanced > Master Controller option is enabledBut i don't got the point, i never use to check this even all other co...

Zohaib Khan · 04-05-2015

Thanks for response. Yes all the APs were running and now I am getting this massage. The code was update 20 days ago. Everything was working fine but now I am facing this issue.. what I can do to resolve

Zohaib Khan · 04-05-2015

Thanks for response, i am running Software Version 8.0.110.0 on controller

Zohaib Khan · 04-05-2015

Hi I have the same issue, today i rebooted the controller after that no Access Point is joining the controller. While debug i can see same logs as given above. I have configured option 43 and 60 as well on cisco switch. Pool commands are: ip dhcp po...

Member Since	‎11-05-2013 11:44 PM
Date Last Visited	‎01-17-2018 08:59 PM
Posts	116
Total Helpful Votes Received	10

User Statistics

User Activity

Cisco 6807-XL SFP bad EEPROM Error

Maximum Wireless Speed for Cleints with Cisco 5520 Controller and 3802 Series APs

Air-AP1852i-x-k9 Default Username and Password Cli Access

WLC 2504 Upgrade 7.5.102.0 to 8.0.110

How lightweight Accesspoint works?

Hi,

Hi All, These settingwork for

Thanks for response. Yes all

Thanks for response, i am

Hi I have the same issue,