About Jon Are Endrerud

Jon Are Endrerud · 10-18-2023

Hello EveryoneWe have a fleet of FTD's and some ASA's that's being phased out. I have SSL decrypt working and have successfully tried all the functionality and it works as expected. But now I am wondering in networks with several thousand users and d...

Jon Are Endrerud · 06-21-2023

HelloI have a 1120 FTD now that reports "high unmaged disk space". This is a known bug through 7.x.x and restart of syslog-ng usually has fixed the problem. I read that 7.2.2 has this: https://www.cisco.com/c/en/us/support/docs/field-notices/725/fn72...

Jon Are Endrerud · 04-26-2021

Hello Trying to pickup files with scp from Cisco I829 with fw (ir800-universalk9-mz.SPA.159-3.M2a).R241#show ip ssh SSH Enabled - version 2.0 Authentication methods:publickey,keyboard-interactive,password Authentication Publickey Algorithms:x509v3-s...

Jon Are Endrerud · 03-18-2021

Hello, I'm a neewbie on the IOS platform after years on the ASA, FTD platforms I am using a Cisco 829IR to deploy IKEv2 between HQ and a remote location. The unit is connecting with IKEv2 againts HQ with Cisco FTD units. This traffic is flowing as ex...

Jon Are Endrerud · 04-23-2020

Hello We are having troubles with our IPsec setup and Aruba Wireless Controllers and access points in our network.Setup as show in picture: The Aruba Controllers are running GRE against the wireless access points through the IPsec tunnel. The problem...

Jon Are Endrerud · 06-21-2023

I did resolve this by running "cat /dev/null > process_stderr.log" to emty "process_stderr.log", and then do "/ngfw/etc/rc.d/init.d/syslog-ng restart".

Jon Are Endrerud · 04-05-2022

Im reading what you are saying @jirka.novak , but I am stuck on this problem. Is SNMP restricted to management port only ?snmp-server host inside 10.0.0.51 community ***** version 2c udp-port 161Traffic inncoming10.0.0.51 53307 10.199.40.1 161 Built...

Jon Are Endrerud · 04-05-2022

Hello everyone,Still no luck for me regarding snmp on 1010 with ASA. I have working SNMP on other series with ASA and FTD's.Now running: Cisco Adaptive Security Appliance Software Version 9.16(2)14 with simple SNMP v2c configuration. You can see the ...

Jon Are Endrerud · 06-14-2021

Did you resolve this. I have the same problem, configurer SNMP as usual on ASA. No luck with version 2c either, unit is not responding. Running latest firmware.

Jon Are Endrerud · 04-28-2021

Have tried this, and as far as I can see they match up. Using the same algoritm with SecureCRT. Will check with linux community.Thank you.

Member Since	‎09-16-2013 05:33 AM
Date Last Visited	‎03-01-2024 12:02 AM
Posts	156
Total Helpful Votes Received	57

User Statistics

User Activity

Firepower SSL decrypt - What ?

FTD 7.2.2 High unmanaged disk space - syslog restart does not work

Cisco ir829 - No matching kex algorithm found

Connectivity from IOS CLI

IPsec S2S with GRE Cisco ASA

Re: FTD 7.2.2 High unmanaged disk space - syslog restart does not work

Re: Cisco FPR 1010 running ASA software SNMP config

Re: Cisco FPR 1010 running ASA software SNMP config

Re: Cisco FPR 1010 running ASA software SNMP config

Re: Cisco ir829 - No matching kex algorithm found