We are deploying a few 9130AX with eWLC and we noticed an issue.In a network with multiple 9130AX/eWLC, one AP would be elected as Primary WLC, another AP would be elected as Secondary WLC. What we noticed is that, if the CAPWAP is IPv6, the AP Prima...

I am using a Cisco router to connect my internal network with my ISP, but I experienced difficulties configuring multicast for IPTV. The IPTV require my router to forward both IGMP messages and multicast streams. However, even I enable the multicast ...

Hi all,The network topology is illustrated below:WAN ------ Router ------ L3 Switch ------ Client PIM-SD are configured on both L3 Switch and Router. The Client is going to join a multicast group, for example 239.42.1.1. This join message is received...

My network topology is like this:WAN --- Router(NAT) --- L3 Switch --- IPTV ClientIPTV is based on mutlicast, so IPTV Client needs to join an IGMP multicast group on WAN. This is implemented with IGMP proxy on Router which is described here and here....