About jamierask55

jamierask55 · 10-28-2014

I need help getting the IOS on a compact flash that somehow got erased so now I have to use the second 1841 in my lab to boot up the IOS on the first one. I also have IOS 15.4 that I want to put on both routers. I know I am supposed to be able to tft...

jamierask55 · 10-21-2014

I am attaching a file that shows the garbage that comes up on a 3750 switch when I try to boot it up. It worked fine for about 3 months after I bought it but I tried to attach my other 3750 switch to stack them and I believe something happened to mak...

jamierask55 · 10-14-2014

I am attaching a log for the 3750 switch that will not boot up. Can anyone tell me if there is something I can do to recover this switch. It is a lab switch and I have another 3750 and I know that these switches are stackable. I just do not know why ...

jamierask55 · 10-28-2014

I also want to add that I was pushing the mode button to see what it all did and I read that if you hold the mode button in for a certain amount of time it sets the switch back to default setting????Truth to that or not???Jamie

jamierask55 · 10-28-2014

Alright the baud rate worked. I changed the tera term baud rate set to 115200 worked and I could get setting of the switch to work. I changed the stack 8/0/1 back to the original config of 1/0/1 and then read someplace in cisco docs that you can chan...

jamierask55 · 10-28-2014

Rick,I got the switch to respond by changing my baud rate to 115200 in tera term and then changed the switch back to default master instead of the 8th switch that was in a stack bought from ebay. I also read that if I went in line con 0 mode and chan...

jamierask55 · 10-28-2014

I have been able to get into my 3750 switch changing the baud rate to 115,200 on my tera term console connection settings. I changed that stack back to master on both my switches but may connect them together with a stack cable(2) and manage them fro...

jamierask55 · 10-21-2014

I have tried a lower baud rate but will try the higher rate to see if that works. I am using tera term and the cable works for the access server stack so I am fairly confident that the cable is not the problem. I am using a serial to usb converter bu...

Member Since	‎11-12-2013 05:50 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	9

User Statistics

User Activity

1841 router IOS problem

3750 switch that is booting up with weird characters and never gets fully booted

3750 switch problem bootup doesn't work

I also want to add that I was

Alright the baud rate worked.

Rick,I got the switch to

I have been able to get into

I have tried a lower baud