About mscmfdadmin

mscmfdadmin · 03-01-2012

I have a new WET200 wireless bridge and cannot authenticate to our WPA2 EAP-TLS freeradius server. Here are the steps that I have taken so far:1. Renamed my pkcs12 client certificate to .pfx extension and imported it into the WET200.2. Used the clien...

mscmfdadmin · 02-20-2012

I just purchased a WET200 wireless bridge. After trying a very long password for an enterprise certificate the bridge restarted and I have not been able to contact the device with the default 192.168.1.226 ip address. I have tried performing a reset ...

mscmfdadmin · 03-02-2012

Okay, I figured it out. The trick was using OpenSSL to make a new pkcs12 certificate that included both the CA and the client certificates in one file. Once I loaded it into the WET200 and typed in the password everything works.The pkcs12 file has to...

mscmfdadmin · 02-20-2012

Eric,I tried to do another reset. With the power on, I held the reset button in with a solid tool that came with my cd drive for well over a minute. I faced the WET200 so that I could put a firm downward pressure on the button. I still cannot communi...

Member Since	‎02-20-2012 05:03 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	4

User Statistics

User Activity

WET200 FreeRadius EAP-TLS Authentication?

Can't Access WET200

WET200 FreeRadius EAP-TLS Authentication?

Re: Can't Access WET200