Hi Is this a problem with sg300 not being stackable - We have an sg500 stack and all the switches happily communicate over the voice vlan (10) and the default data vlan (1). I have connected an sg300 to the core switch, created voice vlan 10 on it, ...

HiI have an ASA5512 and need to spilt traffic off a voice vlan to exit via two external interfaces (one traffic is voice and one is voice application). So I have one internal interface and two external interfaces. From the LAN I can ping the next hop...

HiI need to connect a router to a voice vlan port to allow all voice traffic to exit the VLAN without having to transverse onto the data vlan and use its gateway.However any device I assign to a voice vlan port is ignored by the switch if it isn’t a ...

HiWe have a stack of sg500x switches and are using the auto voice vlan for voip. Phones pick up their ip from the correct scope and auto smartport recognises the phones when plugged into the switch and assigns them to the correct vlan. Have configure...