About InSysProllc

InSysProllc · 01-22-2024

Hello, I have setup a cisco c1118p and I'm having some difficulty with the load balancing. My setup is with 2 WAN connections. WAN1 is from an ISP (Comcast) and provides a public IP address. WAN2 (AT&T) and is behind a modem. The issue is that the tr...

InSysProllc · 05-19-2021

Hello,I have been trying to create a VPN connection from a Cisco c111 to a remote Sonicwall. The Sonicwall belongs to another company so I'm not fully able to see their side. the VPN is coming from a VLAN with the network of 10.2.1.46/27 to 10.0.0.0/...

InSysProllc · 04-07-2021

Hello,I've been going up and down this issue with trying to create VPN tunnel from our Cisco 1111 to a remote sonicwall that keeps failing phase 2 with an error :ISAKMP-ERROR: (1097):IPSec policy invalidated proposal with error 32ISAKMP-ERROR: (1097)...

InSysProllc · 11-20-2013

Hello,I've recently purchased a Cisco 891 and I have it setup at a local office. I'm having some trouble allowing users access to servers and printers across a security zone.. I setup two different zones (MGMT, In-zone). The in-zone is where the serv...

InSysProllc · 05-19-2021

Hi Rob, I cleared the logging and have enabled IPSEC, ISAKMP, and InterfaceCryptographic Subsystem:Crypto ISAKMP debugging is onCrypto IPSEC debugging is onCrypto Interface debugging is on I've tried sending traffic across but it's the same. Syslog l...

InSysProllc · 05-19-2021

Hi Rob, I've removed the pfs group and cleared the session but it's still the same error. The only other thing I can attribute is possibly something in my route tables. #sho crypto routeNo VPN routes to displayDoes the C1111 require an interface to r...

InSysProllc · 05-19-2021

Hi Rob, Thanks for the help! On their side they have:According the the remote side, they can't support higher. I've gone through a few remote sessions, but they just have a standard setup. the only other item I've noticed is under sh crypto tech-supp...

InSysProllc · 11-26-2013

Hello,Thank you for the help. I was trying to configure the zone -pairs through the CCP but for some reason the router was not accepting the configuration.

Member Since	‎11-20-2013 01:13 PM
Date Last Visited	‎01-23-2024 08:23 AM
Posts	8

User Statistics

User Activity

Load balancing on a Cisco c1111

VPN to Sonicwall from Cisco C1111

Cisco C111 VPN Issue with SonicWall

Allowing Access through Zones on an 891

Re: VPN to Sonicwall from Cisco C1111

Re: VPN to Sonicwall from Cisco C1111

Re: VPN to Sonicwall from Cisco C1111

Re: Allowing Access through Zones on an 891