About Mohamed Sayed

Mohamed Sayed · 12-03-2020

Hi team, I have ACI in our DC, i have another router in remote site connected by two link to a Leaf.i need to configure l3out for this router across these two links and prefer one of them for some subnets and vise versus.

Mohamed Sayed · 06-28-2015

hi all, I have Cisco PI2.2 and i found that its database has been stopped and when i tried to stop and start the services i found that the database is failed.the database is successfully up after re-initiate it. i need to know why the database is fai...

Mohamed Sayed · 04-01-2015

hi all, I have Cisco PI 2.2 and when i go to the clients and users dashboard i found that IP address of some clients and users not appeared and its type is not detected as per attached photo. please advise how can i solve it ?

Mohamed Sayed · 03-29-2015

Hi all, I have cisco WLC 2504, i created wlan profile associated to an interface on the BBwhen i assign this wlan profile to any interface on the BB, the clients cannot obtain IP address.when i assign the same wlan profile to the management interface...

Mohamed Sayed · 03-18-2015

Hi all, I have cisco PI2.2 and discovered all the network and i notified that there are some clients' IPs (Servers or PCs or Laptops or ....) not detected. please advice what may be the issue ?

Mohamed Sayed · 11-09-2019

i think you should to separate the control link and data link, you made port-channel 1 for both of them.look at:https://content.cisco.com/chapter.sjs?uri=%2Fsearchable%2Fchapter%2Fcontent%2Fen%2Fus%2Ftd%2Fdocs%2Fios-xml%2Fios%2Fsec_data_zbf%2Fconfigu...

Mohamed Sayed · 09-16-2015

i tried to tag the management interface with the management Vlan ID, but i foundthe network connectivity down (ping is request time out). i have Cisco WISM2 with version 8.0

Mohamed Sayed · 09-14-2015

when you change the redundancy management interface to be tagged with management vlan ID, you should not able to ssh on the controller ?

Mohamed Sayed · 04-06-2015

did anyone face this issue before and solved it ?please advise

Mohamed Sayed · 04-06-2015

Hi marcelvos82 ,please can you tell me how can i add the ASA firewall (WS-SVC-FWM-1 >>> Version 4.0(11)Device Manager Version 6.2(1)F) to my cisco PI 2.0 thanks in advance

Member Since	‎01-08-2013 12:19 PM
Date Last Visited	‎12-14-2022 01:41 AM
Posts	137

User Statistics

User Activity

ACI layer3 out redundant

Cisco Prime infrastructure database stoped and failed

Cisco PI 2.2 cannot detect the IP address of some clients

Cisco WLC 2504 client not obtain ip address

Cisco Prime Infrastructure 2.2 clients and users IPs not detected

Re: interchassis ASR 1001-X

i tried to tag the management

when you change the

anyone faced this issue

Hi marcelvos82 ,please can