hi all,does anyone know how to calculate physcial data rate of a client based on WLC show client detail output? for exampleAP type 802.11bnCurrent TxRateSet m11Data RateSet 6.0,12.0,18.0,24.0,36.0,48.0,54.0
hi all,
i have strange DHCP issue. here is the setup
PC-----Mitel Phone------(HP Layer 2 switch)------Cisco 1801------{WAN}---central dhcp server
Cisco 1801 has vlans and layer 3 interfaces. we have central dhcp server over the WAN. all other subnet...
hi all,im trying to identify the interference source but found no reference to type of Jammers. is there a reference? Mon May 5 12:12:30 2014 AP US052TXPEA-ASL34[0] (64:e9:50:67:ae:90) Device ID: 0x5012, Type: Jammer[19], Severity: 64, Channels: ...
Hi Sandeep,how did you get this? is m9 same as VHT MCS index 9? i see current rate can be m11 or m12, and the table doesnt cover?then 360.0 or 400 x 0.65 = 234/ 240mpbs? is there a similar table for 2.4ghz?
Hi man,i still dont get this WLC1) >grep include "Current Rate" "show client detail 48:f1:7f:ba:cf:54"Press any key to continue..Current Rate..................................... m9 ss2Supported Rates.................................. 6.0,12.0,18.0,2...
thanks Rasika,do "Device ID: 0x5012" or "Type: Jammer[19]" have any reference? or i have to config a monitor AP to see it, the log occure intermittently and random location, make it hard to sit with spectrum analyzer all day long.