Hi,We have applied a simple SoL policy to our service profiles however when I SSH to the KVM address it connects but I see nothing back like I do when connecting via the KVM in UCS Manager.Am I missing a setting somewhere?Many Thanks, Paul
Hi,We are looking to install RHEL6 OS on our UCS B200M3 servers. Does anyone have any information on whether Cisco has any similar RHEL6 utilities to the following HP utilities:hpacucli - CLI utility to configure RAID array from OShpasmcli - view/set...
Hi,One of the Server ports (pointing towards a UCS Chassis) on my fabric interconnect is currently showing as down as it is Trunk mode not Fabric Mode as per all the other server ports.For some reason when I look under the LAN tab this one interface ...
Hi All,I have a customer who is look to double the memory allocation in their B200 M3 Server blades.At present they have deployed 8 x UCS-MR-1X162RY-A (16GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v) so wanted to verify if there are any concerns ...
Hi,My customer is looking to assign the 'External Mgmt Addresses' for their B Series Server Blades (KVM) via DHCP and dynamic DNS instead of an statically defined pool.Appreciate if someone can confirm if this possible?Kind Regards, Paul
Hi Cristian,As requested please see outputs below:UCS1-A(nxos)# sh run int e1/22interface Ethernet1/22 description S: Server no pinning server sticky switchport mode trunk switchport trunk native vlan xxx4 switchport trunk allowed vlan xxx4,xxx7...
Thanks Zaira for getting back to me.I have tried your suggested steps to resolve this and unfortunately this has not resolved the problem.However to confirm when we moved the "faulty" optic/cable to new ports to a new location and it worked so would ...
Hi Jeff,The request has come directly from the SAN team who are looking to pre-define and create the association between the UCS vHBAs (WWPNs) and the Boot LUNs on the storage array.Having tested this in the lab, if I create a Global Service Profile ...
