This is the stack:Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 52 WS-C2960X-48TD-L 15.0(2)EX4 C2960X-UNIVERSALK9-M...
It appears that we have. We planned to roll back the IOS version but discovered a new version had just been released 15.0(2)EX5. So, even though this error isn't mentioned in the release notes, we upgraded the IOS. The problem has not occurred aga...
This issue isn't going away. Today I am seeing seven different interfaces reporting psecure violations. On five of them I have increased the maximum MAC addresses allowed to two and they have settled down and are operational, yet they only report o...
Once the error starts, it doesn't stop, no matter what system is connected to the interface. If we swap computers on the switch, the one that was generating the error operates without problem on another interface and the new system that was operatin...
It is the normal port security violation error:%PM-4-ERR_RECOVER: Attempting to recover from psecure-violation err-disable state on Gi4/0/45 (RNSWB-0-4)%PM-4-ERR_DISABLE: psecure-violation error detected on Gi4/0/45, putting Gi4/0/45 in err-disable s...
