Problem Seeing temperature alerts as soon as booting of the switch. %C6KENV-4-MINORTEMPALARM: module 9 asic-10 temperature crossed threshold #1(=90C). It has exceeded normal operating temperature range. We could see multiple asics on the line card ha...
Thanks. This could be the output drops causing the slowness. Since the packets starts retransmits, it can worsen it. Output drops are not caused by Layer 1. This could be due to buffer filling up. Please send me the below output to see which queue i...
Could you please share me the below
sh mls qos
sh queuing int GigabitEthernet1/0/14
Is the output drops seen increasing on them?
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 7761
Pleas also note all the above were interms of Nexus OTV. I have not worked on OTV with ASRs however I assume the fundamental concepts to be the same. You could cross check it with ASR OTV white papers and best practices for verification.
Apart from the above, please keep in mind there is no AED - reelection if your internal interface goes down, unlike your join interface going down or OTV VDC going offline.
So ensure you have redundancy in place for the internal interfaces too via po...