Hi,Thanks for your post, i understood from the error that you are experiencing parity error on the switch as following:L3-QS2 %USER-3-SYSTEM_MSG: bcm_usd_isr_switch_event_cb:431: slot_num 0, event 2, memory error type 0x1, mem addr 0x17789, cause bit...
Hi James,UCS Mini has Malibu ASIC which is based on the Monticello-CR (MTC-CR) ASIC same as on Nexus 3548/3524. And since it is the same Monticello-CR chip with just less ports hence latency is also same (~250ns) like N3500. regards,Vikash kumar
Hi SBT team,Both N3k and N9k use same Trident 2 ASIC and best for low latency data-center environment. Where N3k is designed for top-of-rack(TOR) implementation and best match for 10G / 40G line rate switching requirement. At the same time N9k is d...
Hi Keshav,i am suspecting that your switch /var/tmp directory is not having enough space, which is causing upgrade failed.please use following command and check the status of "/var" directory.example:-HTTS-DCN-N3k# show system internal flashMount-on ...