About hsood

hsood · 06-11-2018

Hi Team,As we know that CTS dot1x feature has been decommissioned and we are going forward with "CTS manual" method for building a trustsec domain from code 16.6.X IOS-XE onwards.My query was, I was trying to build a trustsec domain between two Cata...

hsood · 01-31-2020

This feature is not available as yet. Regards, Hitesh Sood

hsood · 01-27-2020

Hi Ibrahim, Can you post the output of the following from your Vbond: # show orchestrator valid-vedges Check , if the output from the above command and from the actual CSRv matches or not for the chassis number. It is case sensitive too. Follow t...

hsood · 01-07-2020

It should be admin/admin by default for a new system, if not modified by anyone manually.

hsood · 01-06-2020

Hi Rud, Cisco is already aware of the issue and glad you were able to figure it out. Just for everybody's reference : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvq45302 Please mark this post as closed. Regards, Hitesh Sood

hsood · 01-06-2020

Hi Greg, I am curious, if you are able to ping the IP that you resolved after doing a nslookup. If possible, can you ping me 1:1 privately and I can check if the url works from my end ? Regards, Hitesh

Member Since	‎04-24-2013 12:26 PM
Date Last Visited	‎04-17-2024 12:04 AM
Posts	159
Total Helpful Votes Received	196

User Statistics

User Activity

Issue builiding a Trustsec Domain with CTS manual using 16.6.X code

Re: Can 16 DNAC instances connect to a single ISE instance?

Re: CSRv acting cEdge has control issue with vbond

Re: unable to pull vmanage on port 8334

Re: IOS-XE SDWAN - BIDNTVRFD (Peer Board ID Cert not verified.)

Re: unable to pull vmanage on port 8334