About damiankwest

damiankwest · 12-20-2013

Hey guys, I hope someone can answer a few questions I have and see about fixing a configuration I'm having issues with!I have a situation where I have ADSL2+ with a couple of additional IP Addresses, unfortunately my current router doesn't support NA...

damiankwest · 12-26-2013

Wait, I figured it out. lolI was using Dialer0 as the dialer, but referencing Dialer1 in my NAT rules Thanks for the help!

damiankwest · 12-26-2013

Hey Peter,I hope you don't mind that I piggy-back on this post. I ended up giving the 837 the flick just due to the speed - From what I read it was the hardware holding the speed back, so I didn't bother updating anything more.I have now got myself a...

damiankwest · 12-21-2013

Thanks again for that Peter! Explanations are fantastic for future reference. I have tried to update the firmware in the device, however when I do it comes up 'not enough space on device'. The firmware is about 12.6MB and it seems the flash size is o...

damiankwest · 12-21-2013

You are a legend Peter! I understood all of what you said too, amazing. A couple of notes:The guide I went through said to put in vpdn - but you were right, once I deleted it, the connection dropped and then came straight back up.After doing the no p...

damiankwest · 12-21-2013

Alright, so silly me posted a WORKING configuration thinking that it wasn't working, it's been a long day.So I have the PPPoE interface up, however I can't get connection out to the internet at all, I'm wondering what I'm missing in this regard?If I ...

Member Since	‎12-20-2013 07:26 PM
Date Last Visited	‎08-18-2017 04:28 AM
Posts	6

User Statistics

User Activity

Cisco 837 as ADSL2+ router

Cisco 837 as ADSL2+ router

Re: Cisco 837 as ADSL2+ router

Cisco 837 as ADSL2+ router

Cisco 837 as ADSL2+ router

Cisco 837 as ADSL2+ router