About dangquangminh

dangquangminh · 01-20-2016

Hi We want to share the same extension number says 2434 to two sip phones 8811. But it looks like the two phones can not ring at the same time. The calls go to one phone and sometimes to other. Can someone confirm that cisco 8811 support this featur...

dangquangminh · 05-20-2015

We have a scenario like this. Phone 1 (ext 2111) ---CME1----fiber cable/LAN----CME2-----Phone 2 (ext 3111).CME1 at HQ and CME2 is at the branch. Both CMEs are 9.1.Phone 1 and Phone 2 are being used by the CEO. Now he wants when people call him, at 21...

dangquangminh · 11-14-2014

On the CME 10.0, the voice pool shown as registered. However on the 8831 screen, it shown as "Phone not register".I tried to reset the phone but no luck. Any idea? RTR#show voice register pool 1 Pool Tag 1Config: Mac address is AC44.F211.7E04 Type ...

dangquangminh · 10-23-2014

Hi, We have a 7841 set up as lobby phone. Now we want to allow visitors to search corporate director for extensions only. I can create another directory server to contain just the extensions. But i am not quite sure if we can specify different URL fo...

dangquangminh · 08-25-2014

we have a paging system connected to FXO ports on 2901 CME (version 9.1). Now we a need to use another sip-based valcom at another shop floor. How can we use the same extension on both fxo phone and sip phone?thank you for your time.

dangquangminh · 01-20-2016

changed the transport session to tcp and it works. thank you

dangquangminh · 05-26-2015

how about putting url directory command in voice register global mode voice register globalurl directory http://.....!voice register global mode cme url directory http://192.9.200.83/dir/main.xml !- See more at: https://supportforums.cisco.com/discu...

dangquangminh · 05-20-2015

Thanks for your comments. if we use a second button, do we need to create a DirecrotyNumber 2011 on the CME-1 and DN 3111 on the CME-2?

dangquangminh · 01-16-2015

no i did not.We used that 7841 with CME 10.0. Tried to upgrade to the phone latest firmware (10.2). No luck.

dangquangminh · 01-14-2015

i also have the same problem with 7841 model.

Member Since	‎11-03-2003 01:55 AM
Date Last Visited	‎11-05-2019 11:15 PM
Posts	29

User Statistics

User Activity

voice register dn shared line doesnt work with Cisco 8811 sip phones

two phones at different CMEs ring at the same time Which feature to use?

cisco 8831 screen show as "Phone not registered"

is it possible to specify a different URL directory service for a lobby phone?

share line/extension between FXO and SIP

changed the transport session

how about putting url

Thanks for your comments. if

no i did not.We used that

i also have the same problem