About Ina Mueller

Ina Mueller · 10-29-2018

Hello, I try to setup a VPC Domain with two Nexus 5548 Switches. We cannot use the copper port of mgmt0, so I would like to ping with a vlan interface, because we have no L3 modul. I'm able to ping the peer-Switch but the vPC doesn't come up. Am I re...

Ina Mueller · 12-18-2013

We've integrated SG300-10 into Cisco Prime. The only things I can see, are the following: "Operate.Device Work Center.Device Details.System.Summary" and "Operate.Device Work Center.Device Details.Interface". Is there anybody, doing other things with ...

Ina Mueller · 10-30-2018

hello,I can't see why this setup shouldn't work: https://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mkt_ops_guides/513_n1_1/n5k_L3_w_vpc_5500platform.html#wp999392 , there is a guide to configure a vlan Interface as Keepalive-Interface...

Ina Mueller · 10-30-2018

hello, today I set the bpdufilter on both keepalive-ports and rebooted. The vpc came up and stays up. A test ping within vlan 2 (peer-link) is successfull. Refering to the quote: for N5K I saw also a guide for using SVIs (missing Link here). The SVI ...

Ina Mueller · 10-29-2018

hello, when I use the mgmt0 port and move the ip addresses to mgmt0, the vpc comes up withaout any problems. But I need to use two SFP-ports. I think I have a problem with the spanning-tree setup. I recognized that on one switch the port of the Keep...

Member Since	‎12-18-2013 01:47 AM
Date Last Visited	‎11-05-2018 08:13 AM
Posts	5

User Statistics

User Activity

vPC Keepalive path for Nexus 5548 without mgmt0

Prime Infrastructure 2.0 and Cisco SG300-10

Re: vPC Keepalive path for Nexus 5548 without mgmt0

Re: vPC Keepalive path for Nexus 5548 without mgmt0

Re: vPC Keepalive path for Nexus 5548 without mgmt0