Hi to all,I am currently trying to reach a printer on another network using a Layer 3 switch (Cisco 3750)Here is a simplified diagram : WIFI ROUTER ------------------- CISCO 3750 (10.1.100.1) VLAN 1 (10.1.100.4) ----------------...
EDIT : Thinking about it, I asked the IT guy to make the route but did not specify a metric value. Could that be the problem if the metric is only set to 1 ? Also, on the tracert that does not work, I cannot ping 10.1.100.10 neither. Another weir...
You are correct .. when pinging in windows from a 10.1.100.xx client with command :ping 192.168.2.50 -tI don't get a ping response about 1 time in 25 requestsPrinting from the local device works fine.What could be the cause of this ?
You are correct, When pinging with a source address of 10.1.100.4 I did not get a reply.Since I am not the manager of the printer and cannot change the gateway to 192.168.2.92, I asked to add a static route in the other network router :10.1.100.0 255...