About Grant Curell

Grant Curell · 06-11-2015

I'm trying to get two Cisco IPC phones to register with a CUCM that I've set up in a lab environment in preparation for CCNA Voice. Attached is a screenshot of the wireshark output when one of the phones attempts to register with the server. There ar...

Grant Curell · 06-08-2015

Hello allI'm prepping for my CCNA Voice and I've been trying to get a home lab set up. I'm part the way there, I managed to get an SPA303 working with CME 8.5. I'm now trying to get IP Communicator which is running on my desktop to talk to CME. IP Co...

Grant Curell · 03-01-2015

I'm trying to determine the meaning of the error, "Wrong IOS image on IPBASE Router". Surprisingly, Google seemed to turn up nothing at all on the subject. I recently purchased a Cisco 866VAE. It came without an operating system so I'm trying to put ...

Grant Curell · 01-28-2015

I'm setting up a home lab network VPN and am following this tutorial:http://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/16439-IPSECpart8.htmlI'm using a Cisco 1700 and the router is behind a NAT. I'm a bit confused...

Grant Curell · 01-27-2015

Attached is the full configuration for the router. Additional configuration includes forwarding ports 443 (both tcp/udp), udp 4500, udp 500, and udp 50 to 192.168.1.20. Objective: Configure a Cisco 1700 router as a VPN server, which a Cisco Anyconnec...

Grant Curell · 01-19-2016

I'm glad it helped! Edit: My god... did I really write that two years ago??? Feels like that was yesterday O.o

Grant Curell · 11-29-2015

I figured it out. For anyone else encountering this problem, I was using GNS3 and while I had inserted the EtherSwitch module, I needed to create an EtherSwitch Router. Go to Edit->PreferencesSelect IOS routersClick newSelect your IOS imageClick next...

Grant Curell · 11-29-2015

This has me extremely confused. I can configure a VLAN interface with an IP address however, I cannot configure the VLAN database itself. I have attached a screenshot showing the inventory and my attempt to configure the VLAN database. The only VLAN ...

Grant Curell · 06-12-2015

That was it! Well that's rather obnoxious. CME added the SEP automatically; I didn't even think to add it in the name on CUCM. Thanks so much for your answer. What made that even more confusing now that I look, is that on CBT Nuggets he doesn't add S...

Grant Curell · 06-09-2015

It worked! I'm so happy that it worked, but on other hand it makes me ever so frustrated that I spent literally hours trying to figure that out and it was the telephony equivalent of turning it off and on again bahahaha. I'm watching wireshark and th...

Member Since	‎12-23-2013 10:55 AM
Date Last Visited	‎11-01-2017 11:05 AM
Posts	41
Total Helpful Votes Received	11

User Statistics

User Activity

Phones Won't Register with CUCM 10

Cisco IP Communicator Continuously Registering

Wrong IOS image on IPBASE Router

Crypto Map Peer for Just a Computer

Configuring Cisco 1700 as VPN Concentrator for Cisco Anyconnect

I'm glad it helped!

I figured it out. For anyone

This has me extremely

That was it! Well that's

It worked! I'm so happy that