Suppose an IP from the internet needs to talk to the host on the inside (private IP), we typically NAT the private IP on the inside to a Public IP.Can they still talk if we NAT the IP coming from outside (public IP address) to a private IP address (f...
If there are three routers in a HSRP group, one will be active , other will be standby, what will be the state of the third - will it be also in Standby or in Speak
My service provider says that he has configured this at his end.
Tx 500ms multiplier 5
Rx 100ms multiplier 5
How do I configure the BFD at my end?
Should it be
bfd interval 500 min_rx 500 multiplier 5
Thanks for the reply, on the other hand, I feel 500ms is a bit long interval. (5seconds)
Can I make it to 50ms and ask them to change the same on their end. Will it cause overhead on the network. Just want to know the best interval to be configured...