Hello, I have implemented a new BE 6000 all the basic configurations are done and the phones are ringing. Now I would like to create the SIP trunk between my CUCM version 9.2. When I started creating a SIP trunk its asking for Calling Search Sp...
Hello, I have just installed the BE6000 server with CUCM I would like to know the exact version of the call manager installed.I also have the cisco 7821-K9 phones and its not showing in the call manager. I have refered the compaitibity matrix her...
Hello, I have finished installing BE 6000 and I want to know the exact call mananger version tis using. on the login screen I can see system version 9.1.2.10000-28 is the above number denotes the exact version of the call manager installed ?
Hello, I have the numbers which are 7 digit 8002111,8042222 and they are working good with the below configuration.dial-peer voice 800 voip description ** Outgoing Calls Toll Fr translation-profile incoming dialed destination-pattern 98[024]....
Hello, I have a simple setup with one core 3560 switch with 2 vlans Data 192.168.100.x and Voice 192.168.200.x and CME 4.1 installed on a router 2801 with an IP address 172.16.0.1 connected to it. My phones are registering well and I am able to ca...
Thanks I did not created the a 10 digit dial peer I jsut used T on the existing dialpeer. Can you please le me know what T denotes and when it should be used.
Thanks Greg . Presently I have IP base image on the switch, in order to run the pim command I will have to upgrade it to spservice IOS and do what you mentioned above and let you know.Thanks