Hello,
I set up 3, 9000v switches within ESXi and assigned an IP for MGMT 0.
I didn't set up any VRF just yet, but I did set up the switches using DHCP from a server. I'm unable to ping between the switches.
I'm guessing I need to make one of t...
Hello,
Does anyone know if there is a management software available from Cisco that will allow me to manage multiple RV340 Routers and WAPs?
Is so please let me know what that might be...
Thanks!
Hello,
Does anyone know a way to forward all internet traffic to an external Proxy?
I can't seem to find that setting within the manual.
Thanks in advance!
Hello,
For the life of me, I can't find a command line guide for the RV340W router. Does this not exist?
If the CLI for this router the same as the other RV3xx series routers? If so, is it safe to use those guides?
Thanks in advance!
Hello All,
Question. With the lifetime Security Plus license for the 5506-X does that include lifetime firmware updates? At least until the product is EOS/EOL.
Also, I'm looking to find out really what 'features' are available with that hardware ...
So I can ping the VRF just fine between the switches.
I set up the e1/1 port on each switch the default VLAN and assigned a /24 IP.
I simply can't ping between the interface IP's. The ports are set up as "no switchport".
The VRF context for, ...
When you say "this" firmware I will assume you mean the latest GA?
If so, then thank you for responding and I hope there is a CLI that allows for more granular setup of the router eventually.
Hello,
I have a an ASUS AC88U router which does not directly support VLAN tagging. I want to be able to circumvent that "lack of functionality" by introducing a Cisco SG300 switch between that router and a ESXi server with 6 physical NIC cards. The...
I know this is an old string but since I started it I felt appropriate for me to begin it again. I'm still stuck using trunk ports only between my SG500 and SG500X.
I have what is my edge switch (SG500) connected to a cisco core with LACP set to 'aut...
