About omer_srkn

omer_srkn · 09-15-2014

Hello, We have a problem about media flow-around. We send a fax from MGCP side to H323 side and the call is established with G729 codec between TG-1 and TG-2. all gw's that is between TG-1 and TG-2 is configured "never route media" also ipipgw is con...

omer_srkn · 01-11-2014

Hello,We have a problem about dynamic rtp payload type 123. Wireshark is shown rtp packets which dynamic rtp payload type is 123 malformed. why do cisco gateways send dynamic rtp payload type 123 packets to non-cisco gateways? Can we disable dynamic ...

omer_srkn · 01-13-2014

Hello again,Signaling Protocol is H323. I can not take debug h323 etc logs because of the device has too many calls. But you can find below rtp debug that i took before. I can not share AS full config because privacy stuff.!voice service voip fax p...

omer_srkn · 01-13-2014

No, Our media Gateways send their softswitch with payload 123. They don't want to take this malformed packets which is rtp payload type 123. i don't know why the cisco gws send these packets.Regards

omer_srkn · 01-13-2014

Hello,thank you for your answer, i read it and also we configured before. the problem is non-cisco media gateways are caused some problems reported by one service provider we work together.Is there any way to disable it?sh run | i voice-fano voice-fa...

Member Since	‎01-11-2014 06:14 AM
Date Last Visited	‎08-18-2017 04:28 AM
Posts	6

User Statistics

User Activity

Media flow-around problem when the codec is changed to t38

dynamic rtp payload type 123

Re: dynamic rtp payload type 123

dynamic rtp payload type 123

dynamic rtp payload type 123