Hi, I need a SIP normatlization script which change "Unavailable" into "anonymos" and set "Privacy=none" to "Privacy=on" How the SIP normalization script should look like for this? OLD:From: “Anonymous “ <sip:Unavailable@188.8.131.52>P-Asserted-Ide...
how can I allocate SIP channels on a centralized SIP trunk for foreign locations or maybe a special application.
Before the centralized SIP trunk every foreign location had a own gateway with own ISDN connections to the provider.
After the ...
we have one installation of Expressway-C and E where the E has one single NIC with NAT enabled.
The MRA Zone from the C to the E is connected to the Public NAT IP (NAT reflection) and the Zone is working / established.
But the Zone from Exp...
we have a problem when a call is coming in with no caller ID as "Anonymous" and we are routing this call to a remote destination as a parallel call.
This call is going out at our CUBE as
how can I disyplay incoming anonymous calls / calls with unknown number in call history in Cisco Jabber 12.x?
During signaling I see in the Jabber popup windows "Unknown" is calling. But this call is not displayed in the call history in Jabbe...
the MRA zone of Exp-C is configured the the FQDN of Exp-E.
The FQDN of Exp-E is acutally confgured to his NAT IP (Public IP) which is described here at page 62:
So that means the install parameter PRODUCT_MODE=phone_mode is not neccessary, correct?
At the enduser only "Home cluster" without "Enable User for Unified CM IM and Presence" and at the service profile no IMP servers, co...
in our setup LAN1 is internal LAN (DMZ-internal with private IP) and LAN 2 is in DMZ-external also with a private DMZ-external IP address which is NAT-ed to an external / public IP.
this I already know and there is still a manually doing to change the order of SUB1 and SUB2 in the CM Group.
So there is no automatically chance to auto-register phones in location 1 to SUB1 with a universal template from location 1 and...