I have a cisco 2911 voice router set up for sip trunk to provider.
I am running this behind a nat device and trying to get sip profile to rewrite the private ip to the public ip.
I have set this up with applying the sip profile to my dial peer....
hello all my Cisco peps
We have a client with 4 pots lines from the carrier.
The carrier is moving to sip and the client does not want to buy a new phone system.
They have 4 inbound pots lines from the carrier.
I have set up a 2801 voice rou...
I am having trouble getting my 2801 to receive incomming calls.
When i bypass my firewall all works well. When i am behind the firewall it works great.
I am getting this error in me logs.
sip/2.0 400 bad request
I did open a ticket with the firewa...
This is a sip to POTS hand off. I am not able to make out bound call to the trunk provider. I can make inbound calls.
here is my dial peer config
dial-peer voice 100 pots description INBOUND TO ANALONG PORT 0 destination-pattern . port 0/1/0 forwar...
here is the logs
debug ccsip messages
SIP Call messages tracing is enabledRouter#term monRouter#*Aug 4 15:49:17.692: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:INVITE sip:+firstname.lastname@example.org:5060;transport=udp SIP/2.0Record-Route: <sip:...
I am being told that the sip inspection is shut off on the firewall.
Here is my ccsip call log
Router#*Aug 4 14:52:21.244: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIDeleteContextFromTable: Context for key= removed.*Aug 4 14:52:21.244: //26/47452CF28...