About Roberto Falconi

Roberto Falconi · 05-08-2017

HI, I´ve tried to install a A9K-NVSAT1-LIC on ASR9010 with XR 6.1.2 but didn`t install. First: I execute "license add" command: "license add tftp:172.xx.y.xyz/FOX204dsdsdf_20170406114725089.lic" After that, CLI shows me: "Info: License add successfu...

Roberto Falconi · 09-01-2015

Does Somebody knows about 10 GE fiber ports not work as 1 GE port at ASR-920-24TZ-M?The initial state when the router starts is "Shutdown"... and when I try to enable the interface Te0/1 the output is "license is not activated"...But I need to activa...

Roberto Falconi · 01-23-2014

Somebody knows, Why dont work this vfi, this example is working over ME3600 (PE03) and ASR901 (PE01)configure router PE03 (10.9.0.175)interface GigabitEthernet0/12 ! service instance 2561 ethernet encapsulation dot1q 2561 rewrite ingress tag pop 1 ...

the problem persists, "ip mtu · 09-08-2015

the problem persists, "ip mtu" command Router#SH RUN int bdi 50Building configuration...Current configuration : 75 bytes!interface BDI50 ip address 20.20.20.1 255.255.255.252 ip mtu 1600endRouter#ping 20.20.20.2 siRouter#ping 20.20.20.2 size 1501 df...

I try with "ip mtu", but I · 09-07-2015

I try with "ip mtu", but I got no resultsthe version IOS: Cisco IOS XE Software, Version 03.15.01.S - Standard Support ReleaseCisco IOS Software, ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.5(2)S1, RELEASE SOFTWARE (fc1)Technical S...

Roberto Falconi · 09-01-2015

Hi Vinit... I need to activate 10 GE port as 1 GE port, because are optical ports....... this router have 4 SFP+ port ....

Roberto Falconi · 09-01-2015

Member Since	‎01-17-2014 03:34 PM
Date Last Visited	‎11-06-2023 01:31 PM
Posts	7

User Statistics

User Activity

How to install A9K - NVSAT1 - LIC on ASR9010 XR 6.1.2

10 GE fiber ports not work as 1GE port at ASR-920-24TZ-M

" l2vpn vfi context" not work AT ME3600 (me360x-universalk9-mz.153-2.S.bin)

the problem persists, "ip mtu

I try with "ip mtu", but I

Hi Vinit... I need to