Hi,I hope you're doing great The messages that you are getting mean that the security appliance has received a duplicate of a previous Phase 1 packet, and will transmit the last message. This message could indicate a network performance or connectivi...

Hello Sealy,I hope you're doing greatBased on your description you are using PAT (Port Address Translation) which is a one way NAT. Meaning that it will only work from inside to outside or from outside to inside, but not for both directions. In order...

Hello Kakkouche,I hope you're doing great You could use either version. It will also depend if the remote site supports ikev2. Most of the devices work with ikev1. Below you will find some of the difference between ikev1 and ikev2: https://learningne...

Hi Troosters,I hope you're doing greatCould you please attach the current running configuration of  the new ASA? I noticed that you are missing some information but I would need to verify the configuration first. You could also take some debugs to se...

Hello Jon,Thanks for the information! I did not know that you changed the ip local pool. In that case you just need to make sure that the NAT exemption rule is included before the permit ip 10.70.0.0 0.0.255.255 any. On the ACLs attached on the comme...