Neil Kirkland
Level 1
Level 1
Member since ‎01-30-2014
‎02-29-2020

User Statistics

  • 35 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
20 Replies
10 Replies
5 Replies

User Activity

Hi All,Tearing out the hair. I have an EIGRP setup that appears fine, I can ping every VLAN address from every switch, but when I connect anything to the VLAN nothing communicates, you can ping from the switch to an address in the switches but not to...
I have a fairly simple configuration - two Nexus 3048 ( A and B ), both enterprise licensed. One 10G port on switch A is the start of a fibre ring around a number of HP switches, the ring is closed on the same port on switch B. One 10G port is to rou...
How do I configure an RV320 to link two sites via a BT VPN channel (always up) - I thought these RV320's were supposed to be easy - I find IOS easier !!. Site 1 is 192.168.8.0/24, with a gateway IP (in BT box) of 192.168.8.254 Site 2 is 192.168.10.0/...
Architecture : 3 x 3560 switches, ipservicesk9 image, linked by fibre trunks running EIGRP ...Normal DHCP works - 4 VLANS, 1 uses fixed IP - the Server VLAN, 4 use DHCP.Normal DHCP from VLans 3 to 5 works, I've configured in two ways, in both cases I...
I have a routed DHCP from 4 VLAN's and it works fine except in certain cases - those cases are where a remote PLC tries to call back as a PXEClient. No DHCP discover packets are forwarded by the 'routing' process if the packet contains option 60 = "P...
Community Statistics
Member Since ‎01-30-2014 02:52 AM
Date Last Visited ‎02-29-2020 04:03 PM
Posts 35