Hello all, So we have a specific use case at the moment which is fairly unique and am probably out of my depth. Our employees are contacting there clients using there personal devices (covid) and masking the number to get some anonymity. However mana...
I am running into a problem with my NAT configuration on this router. I have successfully leased a connection from my ISP but am wondering about what the setup would look like if the ip address is negotiated. It's my understand and possibly the wrong...
Hello,
I set up a small lab a few weeks ago and got a consumer dsl line. My hope was that I would be able to configure it with the help of all the resources on the web and I'm stuck. Below is the cfg sample of the respective interfaces I believe to...
I am almost entirely sure my problem is a lack of understanding but hopefully someone can't point me in the right direction.
Below is my lab at work that I am doing some testing trying to get my VPN to work. Everything so far works well but a probl...
So I'm probably in over my head but I'm curious about the technical possibility of using RSPAN to mirror a particular vlan from one of my remote sites and sent it over RSPAN to a switch a our headquarters. I'm aware of the ramifications of saturating...
Thanks everyone for the suggestion but I cobbled together a solution. You can edit the internal CID within the setup for Voice Mail Port. Once I changed the name in there the CID now shows what is respective to that field. I fully recognize that it's...
That is so cool. I had no idea about Bridge Groups.I'm probably out of my depth here as I take my ICND1 in the fall but this certainly beats the help desk! Thanks Again!
Sorry, yes a switch is connected to the router but I get no connectivity from it.
FA 0/0 is the internet uplink from the DSL modem
FA 0/1 is the uplink that is connected to the switch IP 10.79.0.1
SW 0/23 I have issued no switchport and assigned IP...
Your probably getting sick of me Georg but I appreciate you help :)My ISP has told me and I'm quoting "There isn’t a subnet mask for this static IP, its pulled from a PPPOE session and assigned." I can purchase a /30 Subnet (2 usable IP addresses) an...
