I need to enable directed broadcasts on some SVIs. Is there any difference between me using these two configs:acl 1 permit 10.10.10.1int vlan 1ip directed-broadcast 1ip forward-protocol udp 10ORacl 2000 permit 10.10.10.1 any udp 10int vlan 1ip direct...
I'm having a mental block with this. I understand that RD will make routes unique when you have two customers:Cust A:RD: 1:11:1:10.0.0.0/8 Cust B:RD: 2:22:2:10.0.0.0/8 I understand that RT will tell the router which route to import into that VRF and ...
Hello, Can you please help me understand the difference between the commands:clear crypto sa&clear crypto session I understand that clear crypto sa will clear all SA's (phase 1 and phase 2) for a specific peer if you choose. I am understanding that c...
I'm looking for knowledge on whether or not we can scrape y.1731 data to an NMS without using Cisco Prime. Currently, we use an Accedian box for y.1731 which our AI team has found a way using SNMP to pull the data off. I've read many posts about Cis...
I am continuing to work on a QoS project and having a bit of an issue. Like to see what other people might be doing to overcome this. I have seven cos groups and would like to combine groups 6&7 into one class map and then apply that class map to th...
I learned by testing in production that the ip forward-protocol udp 10 command is NOT what I need. That is for forwarding additional broadcast to the IP helper IPs. I did use an extended ACL on the destination SVI and it is working, I do see hits on ...
Hey Paul,Let me start by saying the IPs are arbitrary, I know I used different IP space in my OP. I'm not asking someone to teach me subnetting, I just need to understand behavior of devices with commands, which I thought I knew but maybe not.I'm a b...
You may and you did! Let's break this down so I hopefully touch on everything....May I ask why you need to enable direct broadcast to a range of subnets or the forwarding of UDP broadcast?Can you be more elaborate on what you are trying to accomplis...
Perfect, that's all I needed to know, thank you! So there is no point in using an Extended ACL when doing Directed Broadcasts since the L4 portion of that ACL isn't considered when the router is making the decision to translate to a local broadcast a...
Yup, that I know. Can I just specify the UDP port to forward in the extended ACL? I don't have a lab to test. If I use the extended ACL, do I still need the "ip forward-protocol udp <port>" command? That's what I'm wondering.
