hello forum Guys, Is there capability to use local guest shell on IOS XR ASR9K? I found info on https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/guest_shell.html#id_45860 that local guest feature is a...
hello forum Guys, Please let me know if there is a way to connect adapter to convert RJ45 to SFP. Means that I will plug adapter to RJ45 port(switch or router) and I will be able to connect SFP cable on the other end.
hello forum guys, please let me know, is there any website to configure switch with recommended SFPs modules from cisco? on https://apps.cisco.com/ccw/cpc/guest/home, there is an option to configure routers only with SFPs modules but not switches.
hello forum guys,
I try to crate dual hub scenario in the lab environment. Spoke 1 register fine with hub 1 and hub 2, spoke 2 register fine but I can cot ping tunnel IP addresses hub 1 and hub2.
Topology:
Dual Hub scenario
Here is config:
HUB...
1) best recommended routing protocol by cisco is bgp, simply because bgp allow You to configure hub as " no touch device" so hub learns its peers dynamically by using " bgp listen range ... " command.
2) You can migrate to ikev2 by using same dmv...
hi
check version of hsrp
Local virtual MAC address is 0000.0c07.ac01 (v1 default) <------------
Looks like U have version 1. Configure version 2 on both switches:
standby version 2