About mhumphries73

mhumphries73 · 08-06-2018

when i boot up our 2960-xr i get the followinig error 08:42:04 UTC Mon Aug 6 2018: Unexpected exception to CPUvector 300, PC = 2C8DC68-Traceback= 0x2C8DC68z 0x2B92EBCz 0x2B8F5BCz 0x2B8C0DCz 0x21A0F70z 0x21A114Cz 0x21A12C4z 0x567B18z 0x567D40z 0x2E316...

mhumphries73 · 09-07-2017

i have a 2960XR stack with 2 members. my current IOS =c2960x-universalk9-mz.152-4.E3.bin last night i attempted to upgrade to c2960x-universalk9-mz.152-6.E.bin and I found that the system would not allow any clients to connect ( topic for another ...

mhumphries73 · 10-06-2018

you have to renumber the existing switch 3 to a different number like say 5 then renumber 4 to 3 then then "5" to 4 you cannot renumber a switch to an existing switch number.

mhumphries73 · 10-06-2018

you have to renumber the exisiting switch 3 to a different number like say 5 then renumber 4 to 3 then then "5" to 4 you cannot renumber a switch to an existing switch number.

mhumphries73 · 10-02-2017

so yesterday, i rebuilt the entire stack, in fact i even went so far as to move the stack modules to 2 new switchs and completely rebuild the config. when i first connect the stack cables everything comes up fine and they connect and tansfer all of...

Member Since	‎09-07-2017 05:37 AM
Date Last Visited	‎10-12-2018 12:22 AM
Posts	6

User Statistics

User Activity

2960XR-48FPSI Unexpected exception to CPUvector 300

Stack failure after IOS upgrade - 2960xr

Re: cisco 2960x switch renumber

Re: I am going to try this on May

Re: Stack failure after IOS upgrade - 2960xr