Hello,I would have a question regarding the MLS/MQC QoS .We have a Cisco 3850, supporting two QoS Queuing hardware models at egress: 1P7Q3T OR 2P6Q3T (mentioned here page 66: https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2016/pdf/BRKARC-3439....
Hello,
I would have a question about the QoS in a Wireless environment
Based on this configuration page example: https://www.cisco.com/c/dam/en/us/td/i/200001-300000/290001-300000/294001-295000/294182.tif/_jcr_content/renditions/294182.jpg
I'm not su...
Hello,
Currently studying the switching methods, someone could confirm to me the assumptions as follows ? I also would have some questions.
Generally the layer-2 switches have ASIC components with CAM memory to perform the frames forwardingGenerally...
Hello community,
Regarding my Spanning Tree studies, I'm not sure about the behaviour on a specific use case, and specifically when we add a new switch to an existing STP topology (with cisco pvst+).
In this purpose I will expose to you my unders...
Hi,Thanks for the replyAs far as I know, the 3850 support the StackWise Virtual ?(https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-8/configuration_guide/stck_mgr_ha/b_168_stck_mgr_ha_3850/b_168_stck_mgr_ha_3850_chap...
Hi Peter,
Just an additional point,
So, do the following assumptions are true:
Port passing UP: - Listening immediately - Ports roles and states determination with received BPDUs - Root port and Designated port, will pass into Learning and F...
And additionnal information, I have a SVI of the Primary VLAN on the switch, but not used in my private VLAN context . The default gateway of my hosts are the router VIP (on the primary VLAN Subnet), which ping .
