Issue with getting connectivity
Currently have a 3750X connected to a server at layer 3 only. Server will not communicate unless it is a routed port. Server is connected on port g1/1/1
interface gi1/1/1
no switchport
ip address 172.16.16.33 255.255...
Having trouble with communicating to a point of access gateway. Currently only way to communicate is through a routed port. Working with 3750-x. No distribution layer, they want to go from an access layer where all the PCs are connected to the poag. ...
Thanks for the input. I do not have the sccp local and bind commands. I will input those. How do I verify the conf bridge is registered?All the phones are Cisco 7941, there is one that is a 7937 and 7961Should I be using software conferencing or hard...
So when i have the client ports as members of vlan1280 and set the port connecting to the VPN device on vlan 1280 as an access port, the communication with the device stops. at least the pings from the switches come back unsucessful. Probably should ...
The SVI currently isinterface vlan 1280ip address 172.16.16.32 255.255.255.0 with a layer 2vlan 1280name Data vlan the connecting port gi1/1/1 is currently unconfigured.int gi1/1/1end Would like to be able to come up with a solution in order to have ...
The point of access gateway is taking around 12 different subnets on 12 fiber ports and creating a VPN for each subnet and shooting them out an encryptor. Not sure if that is any help but thats where the VPN comes in.
