About lacv2k

lacv2k · 02-23-2018

Dear Experts, I recently setup two 3850 switches for different netwoks. In the configuration I setup SNMP for monitoring traffic throught specific interfaces. After many day of normal operation, my client, the owner of the switch and the network, c...

lacv2k · 02-22-2018

Dear Experts, I recently setup two 3850 switches for different netwoks. In the configuration I setup SNMP for monitoring traffic throught specific interfaces. After many day of normal operation, my client, the owner of the switch and the network, c...

lacv2k · 09-21-2017

Dear Experts, I´m just start working with RSTP for a project in a topology that seem to have a few issues.The topology (attached) can´t be modified because most of the links are radio based (900 MHz), which in fact add a couple of issues to the netwo...

lacv2k · 10-17-2017

Dear all, Regarding to the case exposed, I have changed RSTP timers to the maximum values, and I could experiment a better stabillity of the network: flapping has been reduced but still present and crashes are gone so far. I´m still monitoring the ...

lacv2k · 09-21-2017

Do you mean the loops in the topology attached? Yes, all is in VLAN1.I have not created any VLANs in SIEMENS switches (VLAN1 is the default) and the PVRST at 3850 is set at VLAN1. There are other VLANs at 3850 but all PVRST configuration is at VLAN1....

lacv2k · 09-21-2017

Thank you, Philip. I set PVRST at CISCO 3850 and RSTP at all Siemens switches. Both switches are using VLAN1 by default.Do you think this could be an issue? Best regards,

Member Since	‎09-21-2017 11:44 AM
Date Last Visited	‎03-02-2018 09:07 PM
Posts	6

User Statistics

User Activity

SNMP configuration change

SNMP configuration change

RSTP issues for a mixed network

Re: RSTP issues for a mixed network

Re: RSTP issues for a mixed network

Re: RSTP issues for a mixed network