To add onto chrihussey's comment, yes the ipbase license is capable of routing. The global command is just "ip routing" that will turn on your intervlan routing if that is what you're trying to do. There's no need for a router on a stick.
Your ques...
It looks like your helper-address configurations are correct. I've had this issue myself, it turned out to be the pool configuration on the DHCP server. The DHCP pool was configured with the wrong default gateway and DNS addresses. Check the pools...
We're not sure if you're trying to accomplish something specific or just looking for an explanation of why the vlans get routed when connected to the router.
The router will route to any network that it is directly connected to or knows about in i...
When using the Voice Vlan, the switch identifies the Cisco IP phone using CDP and puts that traffic into the Voice Vlan while "untagged" data traffic (traffic from the PC) is put into the access vlan. If you're using a Cisco IP phone, the Voice vlan...
Has the device ever successfully booted up? Upon initial boot up the device will get stuck looking for "POAP", automatic configuration stuff, to break that and continue boot up you have to type "N" and hit enter. By default the boot variable is not...
