I am having problem with instalation of 4.3a OS on X306. After booting it starts the WinPE procedure, but only to output a message saying SATA RAID needs to be enabled, the server will reboot.But I alread enabled SATA RAID in BIOS, and configured it ...

Is there a way that you can receive pulse dialing over ISDN PRI link? If so, what kind of hardware (interface card) you have to have on the customer side to be able to understand pulse dialing and forwarding it to lets say IVR?

Hi,we implemented a CCM 4.1(2), and a MGCP voice gateway 2811 with a E1 PRI ISDN link to the PSTN, and some 100 IP phones, and everything looks fine. Then, we wanted to add some faxes to our network. We chose ATA as our first solution. After 5 days w...

Should the ICT (non-GK) between CCM 3.3(3) cluster and CCM 4.1(2) cluster work?

We have two routers that are connected by FR, with multilink PPP connection, with LLQ. After the connection is established two Virtual-access interfaces are created one in MLP Bundle mode and one in PPPoFR mode. The interface in MLP Bundle mode has a...