About User1234

User1234 · 10-03-2017

Hi there, i bought this Switch but ntp is not working.All other Clients behind the Switch do have no Problem getting Time from my local ntp Server(192.168.1.1). Active Server is always 0.0.0.0.. I tried with sntp broadcast and unicast. I tried it wi...

User1234 · 10-06-2017

i managed it and it works now. the problem was the "dns resolver" configuration on pfsense. its the dns server of pfsense. it was no problem for all client machines recieving ntp. even freenas, a brother printer and all windows clients had no problem...

User1234 · 10-04-2017

No other device in my local network uses sntp..only ntp...so, I will try to disable ntp on the subnet the switch listens to. I also will try a straight port forwarding to my switch on port 123. in my firewall logs i found no blocking rule for port 12...

User1234 · 10-04-2017

i did at least 100 reboots this is the screenshot of the settings you want.

User1234 · 10-04-2017

as you can see... i have also problems with nameserver on the switch. of course my name server is configured and working fine on all clients. i use a static ip with gateway (ipv4). i even tried it with dhcp ->no change -> same problem. i made two e...

User1234 · 10-04-2017

As you can see in this screenshot...nothing!!

Member Since	‎10-03-2017 10:11 PM
Date Last Visited	‎10-06-2017 02:47 PM
Posts	15

User Statistics

User Activity

SG-200 08 ntp not working

Re: SG-200 08 ntp not working

Re: SG-200 08 ntp not working

Re: SG-200 08 ntp not working

Re: SG-200 08 ntp not working

Re: SG-200 08 ntp not working