LesterClayton

LesterClayton · 06-25-2018

You absolutely should go back and change it. 1.1.1.1 as you have already pointed out is now a valid ...

LesterClayton · 04-24-2018

You have led me to a resolution. I have placed the following command on the switch: mac address-tabl...

LesterClayton · 04-24-2018

I like where this is going. Thank you I'm going to play around with this. Hopefully by telling the s...

LesterClayton · 04-24-2018

The traffic itself is not seen as Multicast, but rather as Unicast :/

LesterClayton · 04-23-2018

I want to suggest a reason why this isn't working - and will never work. It's a theory I have, but i...

LesterClayton · 04-23-2018

My side of the network is MST. The other network is RSTP. Will removing the bpdufilter enable line c...

LesterClayton · 04-23-2018

Tried that. Also tried adding the filter to the ingress interface where the traffic comes in from (b...

LesterClayton · 04-23-2018

Already tried that. Also tried applying access-group to every interfaces which make up the port chan...

LesterClayton · 04-23-2018

We have joined our L2 network with another one via a Cisco Catalyst 4500X switch, which has two egre...

LesterClayton · 03-28-2018

I just wanted to add that I've also had this problem recently, and the solution for us was to replac...

LesterClayton · 10-06-2017

Thanks - worked like a charm!

Date Registered	‎10-05-2017 10:06 AM
Date Last Visited	‎09-05-2018 12:26 AM
Total Messages Posted	12
Total Helpful Votes Received	5

Re: WLC Virtual Interface Address