Hi folks, Have a look at the config of this remote router on test network I've constructed:controller E1 0/0 channel-group 0 timeslots 1-31! controller E1 0/1! ! interface FastEthernet0/0 no ip address duplex auto speed auto! ...
Just a scenario: A STATIC route between 2 ASBRs in separate autonomous systems via a PIX firewall has failed. There is a secondary firewall route between the ASs in the event of failure on the first firewall route. My problem centres on the interface...
Have a look at this policy based routing URL. It shows how to configure the policy for the scenario you mentioned:http://www.cisco.com/en/US/partner/tech/tk364/tk871/technologies_configuration_example09186a00801f3b54Hope this helps!