Hi folks,
I've a bit of an odd scenario here, so hopefully this makes sense.
I have VLAN 100 which is our Management VLAN. It runs between two ASR920s and is trunked to the rest of the network. The Management interfaces on these devices also connect ...
Hi all,
I've been playing around with the REST API for FMC today, as I need to test migration from our current ASA Platform. Ideally I'd like to use the API to bulk create subinterfaces, to save me doing it in the GIU (and to ease deployment time).
I...
Hi all,
We're considering moving to Firepower 2140 to replace our aging ASA estate. One item on our roadmap in implementing private VLANs.
The ASA introduced PVLAN support in 9.5(2) with the use of the secondary-vlan command - does anyone know if F...
Hi folks,
Long time reader, first time asker, so lets dive straight in.
We're migrating our core from ME3600X to ASR920. We've two acting as our core and two C2960s hanging off for LAN usees. I've configured a couple of BDIs as gateways for our firew...
Yes static ARP did fix the problem, but may not have held during a changeover. It seems this seems to be an odd issues between the Control Plane interface (g0) and the actual forwarding plane. It had TAC scratching their heads. In the end I worked ar...
core1-new#sh arp vrf Mgmt-intf
Protocol Address Age (min) Hardware Addr Type Interface
Internet 192.168.1.1 0 Incomplete ARPA
Internet 192.168.1.2 45 00ea.bd5e.133f ARPA GigabitEthernet0
Internet 192...
Hi all,
I solved this issue. The container UUID is the Device UUID. The problem I was facing is that the fpphysicalinterfaces API is designed for NGIPS devices whereas the physicaldevices API is designed for NGFW devices. This was detailed in the doc...
I located the issue while attending site.
It seemed that access2 had not taken the mst configuration and was still running PVST. Given that PVST maps to MST0 it was causing a bunch of issues.
Once I reconfigured spanning-tree, everything came back to...
