About support1@lima.co.uk

support1@lima.co.uk · 05-18-2023

Am I able to configure interface flow monitoring on a N5K-C5548UP System version: 7.3(8)N1(1)

support1@lima.co.uk · 05-09-2023

Hi, I have configured radius on some N5K-C5672UP switches. Running 7.3(13)N1(1). I can login using my AD credentials but for some reason I seem to have a reduced privilege level and cannot see all commands when doing a conf t. L1N5K02-P(config)# ?no ...

support1@lima.co.uk · 03-29-2023

Hi all, I am having issues when attempting to configured Radius please see below.. L1N5K02-P# conf tEnter configuration commands, one per line. End with CNTL/Z.L1N5K02-P(config)# no fips mode enableFIPS mode is disabledL1N5K02-P(config)# radius-serve...

support1@lima.co.uk · 03-01-2023

Can anyone confirm the impact on wired dot1x client connections and current load when performing a split upgrade and whether the one ISE node can handle traffic during upgrading the other? If not how do I confirm this?

support1@lima.co.uk · 02-25-2023

Hi all, I have applied STP to interface 1/34/1 and attemping to use 1/33 as the default path for traffic, it is still showing BLK... any suggestions. conf interface e1/34/1spanning-tree vlan 104 cost 2500spanning-tree vlan 107 cost 2500spanning-tre...

support1@lima.co.uk · 05-22-2023

Anyone?

support1@lima.co.uk · 05-18-2023

This guide states the 5500 series has sampled netflow but I have no feature enable netflow/sflow/flow exporter commands or commands for either within conf t https://community.cisco.com/t5/security-knowledge-base/netflow-support-matrix/ta-p/3644638?at...

support1@lima.co.uk · 05-10-2023

No difference. Radius is working for another device and I can see the full range of conf t commands but on the device is question I only see a few. I am unsure if this is a NPS issue or more a switch issue...

support1@lima.co.uk · 05-10-2023

Yes there are 3 values in the 5000 attribute. Should it only have the shell:roles*\network-admin\ and remove the priv 15 and other shell role value? I thought you could have more than one value in the 5000 attribute..

support1@lima.co.uk · 05-10-2023

Hi, I have removed the network operator but is this required as on the switch it states my account is a network-operator. Should this be matching on NPS and switch? roles:network-operatoruser:mike.allen_adm

Member Since	‎10-06-2017 03:04 AM
Date Last Visited	‎02-14-2024 12:05 AM
Posts	68
Total Helpful Votes Received	24

User Statistics

User Activity

Netflow or sFlow on N5K-C5548UP

Cisco 5K switch radius logins have reduced priviledge

Errors when setting up Radius with NEXUS 5K

ISE upgrade and the impact on wired dot1x client connections

VLAN STP showing BLK

Re: Netflow or sFlow on N5K-C5548UP

Re: Netflow or sFlow on N5K-C5548UP

Re: Cisco 5K switch radius logins have reduced priviledge

Re: Cisco 5K switch radius logins have reduced priviledge

Re: Cisco 5K switch radius logins have reduced priviledge