About Legusol

Legusol · 05-20-2022

We have AnyConnect set up with Certificate validation. When we have the option unchecked (disabled) "Consider the certificate valid if revocation information can not be reached" (forcing the CRL check) our clients are unable to connect and the FMC VP...

Legusol · 01-07-2022

We just upgrade to FMC v7.0.1 and afterwards we seeing an issue with a Health Alert that we cannot clear. The following is showing for one of our FTDs. At the interfaces shown are disabled interfaces on the FTD that are not in use which they should b...

Legusol · 07-02-2020

We have several users who connect to our network using Anyconnect. Their laptops connect without issue and I can see an established connection. We tunnel all traffic and everything and after a few minutes all traffic stops passing across the VPN howe...

Legusol · 01-30-2019

Our ISP has issued us two subnets: one is a /30 subnet and the other is a /28. For the sake of this discussion (with false IPs) the /30 is 46.181.101.212/30 with the provider assigned .213 and our WAN on .214. The /28 is 46.181.101.112/28. They are r...

Legusol · 01-10-2022

Thank you! That worked perfectly!

Legusol · 07-27-2020

I actually figured out the real issue to this. The Network Threat Detection feature of the ASA was "shunning" our VPN clients at times which was causing the period disconnect and then no network traffic to pass. Once we added the VPN IP Dhcp pool to ...

Legusol · 07-06-2020

Thank you for the reply. I just got back in the office today. I checked out one of our user's devices having issues and she did not have the 'Connectify LightWeight Filter', however, the device did have 'Npcap Packet Driver (NPCAP)'. I have previousl...

Legusol · 01-31-2019

This was actually a "stupid" mistake on my part. We are in the process of changing to a new server for this and when I was setting up the NAT I was using the new server inside IP address but I still had the old server relaying the traffic. So in esse...

Legusol · 01-30-2019

Hi Jon, I thought about that previously and created the NAT as a NAT before Network Object and moved it all the way to the top of the list. When I run a packettracer test as well is shows that it should be picking up this NAT.

Member Since	‎10-06-2017 06:22 AM
Date Last Visited	‎05-25-2022 12:02 AM
Posts	9
Total Helpful Votes Received	15

User Statistics

User Activity

CRL Polling Failed during Certificate Chain Validation

FMC Health Alert not clearable (Interface Status (Modified))

AnyConnect VPN Client Connected but stops passing traffic

NAT Question

Re: FMC Health Alert not clearable (Interface Status (Modified))

Re: AnyConnect VPN Client Connected but stops passing traffic

Re: AnyConnect VPN Client Connected but stops passing traffic

Re: NAT Question

Re: NAT Question