About madhav.kumar.bhardwaj12

madhav.kumar.bhardwaj12 · 01-02-2025

We are configuring Cisco 44XX series SBC/CUBE for MS Teams direct routing configuration with NAT configuration. We are following below doc but it does not mention about default SBC port range for configuration. What is default media port range on Cis...

madhav.kumar.bhardwaj12 · 06-13-2018

How can i extract first and last name of calling user once call lands on UCCX system. Our requirement is to get First name and last name of calling user and pass it to other application. I tried to use Get User field but it says- User ID is blank.

madhav.kumar.bhardwaj12 · 03-30-2018

When scheduling a call via TMS adding an audio template with DTMF tone entries the dtmf tones are never dialed. The Intercall conference bridge is dialed but you never hear the DTMF's being dialed so you have to manually enter the DTMF's from an endp...

madhav.kumar.bhardwaj12 · 03-29-2018

We are using SIP endpoints, CUCM 11.5, CMS 2.1, Expressway C and Expressway E B2B and MRA clusters. SIP based calling works fine with SRV records etc but we are not able to understand the call flow for H323 and IP based dialing for B2B calls. I as...

madhav.kumar.bhardwaj12 · 02-20-2018

Can we monitor per site voice EF traffic with help of Cisco Prime Assurance servers ? For example, Site A is marking 70 % voice calls as EF and remaining calls as BE(Default) ? Also can we monitor EF marking on Oracle SBC severs with help of Cisco ...

madhav.kumar.bhardwaj12 · 01-02-2025

Thanks @Vaijanath Sonvane for quick response. Shared doc is really helpful. I have additional queries - 1. For 8XXX service SBC, can i use the same media port range UDP 16384 to 32766 ?16384 32766 2. We are configuring SBC without Media bypass option...

madhav.kumar.bhardwaj12 · 07-08-2018

Thanks Tom. It seems that as output, we are receiving full name but we need first name and last name in separate variable. Is there option in xml directory to use first name as variable ?

madhav.kumar.bhardwaj12 · 04-03-2018

Thanks Nick again for information. It seems that URI@IPaddress solution is not possible or it is manual process as you described for every new call.

madhav.kumar.bhardwaj12 · 04-03-2018

Thanks Nick for solution. Appreciate it. It worked for me. I just wanna inputs from your side about IP based dialing from inside to outside. So my company users want to dial external IP address from inside and that worked with temp domain like 10.10....

madhav.kumar.bhardwaj12 · 01-16-2018

Thanks for reference . I have done the same with port 8080 as we are using only http but not sure how to perform the test to make sure if it is working properly or not. EM Serveice- http://voiceservices.lab.com:8080/emapp/EMAppServlet?device=#DEVICEN...

Member Since	‎03-09-2015 03:20 AM
Date Last Visited	‎01-14-2025 12:54 AM
Posts	115
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco SBC Signal and media port range

First and Last Name - Script

TMS and CMS DTMF

H323 and IP Based Dialing - CMS

EF traffic Monitoring

Re: Cisco SBC Signal and media port range

Re: First and Last Name - Script

Re: H323 and IP Based Dialing - CMS

Re: H323 and IP Based Dialing - CMS

Re: EM Redundancy