About william_chen

william_chen · 03-10-2015

Hi all, I have a problem with C240 M3S with boot device. 1. There is a Cisco UCSC RAID SAS 2008M-8i Mezzanine in the C240 M3S2. I set up the raid5 for four SAS disks with Cisco UCSC RAID SAS 2008M-8i Mezzanine3. When I install the ESXi 5.5, it can b...

william_chen · 03-13-2015

Hi Manuel, I replace the raid card, it works!! I can boot from disk. Thank you!

william_chen · 03-12-2015

Hi Manuel, Thank you for your help. I will open a case with TAC.

william_chen · 03-12-2015

HI, All PCIe slot optiomROM -> enable Messanine optionROM -> enable reboot UCS > the error message is the same"Failed to find boot device" thank you!

william_chen · 03-11-2015

Hi Manuel, I setup the local HDD, it still shows error. I also disable all options for ROM, it doesn't work. please refer to my attachment Thank you!

william_chen · 03-11-2015

Sorry, I can't find the item of local storage.I never setup the boot order ( default bios can find raid card, I don't know that raid can't be found at this time ) Would you please offer any references, thank you By the way, I check the install guide ...

Member Since	‎03-10-2015 06:58 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	8

User Statistics

User Activity

C240 M3S can't setup first boot with Cisco UCSC RAID SAS 2008M-8i Mezzanine in BIOS

Hi Manuel, I replace the raid

Hi Manuel, Thank you for your

HI, All PCIe slot optiomROM -

Hi Manuel, I setup the local

Sorry, I can't find the item