Hi all, I have a quick question about old Nexus N9k-C9372PX. Can they do simple vlan mapping 1-to-1 on a trunk port? Like this on Catalyst:https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/15-02SG/configuration/guide/config/tunnel....

Hi all,   Is it possible to set a description on a PPPoE interface with Radius on an IOS-XR ?   I can not find information.   On IOS-XE, I do like this in my radius, but it does not work with IOS-XR :   "lcp:interface-config=description <MY BEAUTIFUL...

Hi all,   I have a question for you, do you know if there is a limit in the name of a policy-map for a PPPoE session?   For example, here are 2 policy-maps in HQOS that are strictly the same:   policy-map QOS-4M-ETH-VOIP-RD-OUT class class-default ...

Hi all,   I have an ASR9K with BNG and a CPE that connects to PPPoE on my ASR9K.   I try RIPv2 between my CPE and my PE but impossible to send and receive my routes.   With debug, I have this:rip [1058]: ignored packet from 172.27.50.10 (could not fi...

Hello,    I want to allow vpn connections anyconnect with time-range. It's works when workstation are in same timezone that the firewall.   time-range TEST periodic daily 8:00 12:00 ! group-policy POLICY-TEST attributes vpn-access-hours value TEST   ...