Hi all, I have a quick question about old Nexus N9k-C9372PX. Can they do simple vlan mapping 1-to-1 on a trunk port? Like this on Catalyst:https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/15-02SG/configuration/guide/config/tunnel....
Hi all,
Is it possible to set a description on a PPPoE interface with Radius on an IOS-XR ?
I can not find information.
On IOS-XE, I do like this in my radius, but it does not work with IOS-XR :
"lcp:interface-config=description <MY BEAUTIFUL...
Hi all,
I have a question for you, do you know if there is a limit in the name of a policy-map for a PPPoE session?
For example, here are 2 policy-maps in HQOS that are strictly the same:
policy-map QOS-4M-ETH-VOIP-RD-OUT
class class-default
...
Hi all,
I have an ASR9K with BNG and a CPE that connects to PPPoE on my ASR9K.
I try RIPv2 between my CPE and my PE but impossible to send and receive my routes.
With debug, I have this:rip [1058]: ignored packet from 172.27.50.10 (could not fi...
Hello,
I want to allow vpn connections anyconnect with time-range.
It's works when workstation are in same timezone that the firewall.
time-range TEST
periodic daily 8:00 12:00
!
group-policy POLICY-TEST attributes
vpn-access-hours value TEST
...
Hi Aleksandar,Use case, its simply when I type "show interface description", example : On IOS-XE : #sh int descriptionInterface Status Protocol Description[... snip ... ]Vi2.9 up up ...