About ruhulamin210

ruhulamin210 · 11-08-2017

Hi, I install a new Nexus N9K-C93180YC-EX and when i boot it first time, it boot it in ACI mode. I need NX-OS mode but i don't have any APIC. There is no NX-OS image on bootflash as well. Now when i trying to copy the image from USB to bootflash ther...

ruhulamin210 · 12-12-2023

enable coa from ISE as per the screenshot

ruhulamin210 · 11-10-2017

I try to do this step as per this blog but unfortunately in my cisco nexus switch (N9K-C93180YC-EX ) there is no usb in /usb directory but when i insert the usb sticks usb2 is shown under /usb (usb/usb2), when i tried to copy the image from /ub/usb2 ...

ruhulamin210 · 11-08-2017

According to that document before doing the conversion in loader > prompt i have to copy the NX-OS into the switches Bootflash memory. currently my switch is not connected to APIC and there is no NX-OS image into the switch Bootflash memory. In (non...

Member Since	‎10-09-2017 11:36 PM
Date Last Visited	‎12-13-2023 12:23 AM
Posts	4
Total Helpful Votes Received	5

User Statistics

User Activity

Nexus ACI mode to NX-OS mode migration using USB issue

Re: 11213 No response received from Network Access Device after sendin

Re: Nexus ACI mode to NX-OS mode migration using USB issue

Re: Nexus ACI mode to NX-OS mode migration using USB issue