About gbieli

gbieli · 05-20-2022

Hi, I work in a project where we have C8500/ASR1006-X with IOS-XE >=17.6 and ASR9k with 64bit IOS-XR >=7.4. I'm currently evaluating the programmability interfaces that both IOS operating systems offer. They both seem to support NETCONF and gNMI. As ...

gbieli · 01-27-2020

Hi,According to the SDA validated designs and best practices you would create an IP Transit between the fabric sites and deploy a C, B, E and WLC function at every site if you have a L3 WAN in between. But you then have to manually configure the WAN ...

gbieli · 09-26-2018

Hi I have a Cisco CSR1000V version 16.7.2 as a device in my NSO. I've built a netconf package for it with the pioneer package. The connection is working and with an empty config on the router, the sync-from also works. But if I have a BGP config ...

gbieli · 10-23-2020

Hi,I managed to fix this by assigning the banner text to a variable and use that variable in the multiline command section:#set($banner = " Customer Name: ... Solution: SD-Access with Cisco DNA Center Switch Name: $(hostname) ... ") <MLT...

gbieli · 09-27-2018

Thank you for the quick answer. I just made another test with IOS version 16.9.1 and there it works. Seems to be an issue in the 16.7 train.

Member Since	‎10-10-2017 11:47 PM
Date Last Visited	‎04-22-2024 02:41 AM
Posts	5

User Statistics

User Activity

IOS-XE & IOS-XR NETCONF vs gNMI

Stretched Fabric Site over L3 WAN

info illegal reference ... BGP IPV4 config protocol - CSR1000V via netconf

Re: DNA Center 1.3.3.6 - Template editor - Banner

Re: info illegal reference ... BGP IPV4 config protocol - CSR1000V via netconf